Infiniti QX60 interior leather second-row seating fitted with child safety car seats
|

Family Utility Tested: How Many Car Seats Fit in the 2024–2025 Infiniti QX60?

There’s a moment every parent knows—you’re standing in the parking lot, three kids in tow, trying to figure out if everyone is actually going to fit in the SUV. The QX60 promises three rows, but can it deliver on car seat practicality?

Let’s cut through the marketing and get to what actually matters: how many car seats fit, where they go, and what works best for your family.


TL;DR

The Infiniti QX60 can fit three car seats across the second row with the bench seat configuration, or two car seats in second-row captain’s chairs with a third car seat in the back. Second-row car seat installation gets top marks for ease and fit, with Grade A ratings for infant seats, rear-facing, and forward-facing convertibles . The third row is significantly tighter—a forward-facing convertible earns a Grade B due to legroom constraints, while a booster gets a Grade C because there’s barely enough seat width and the buckles are hard for kids to reach . The One-Touch second-row seat is a standout feature—it works even with forward-facing car seats installed, making third-row access genuinely family-friendly .


Second Row: The Sweet Spot

The second row is where the QX60 truly shines. Whether you choose the bench or captain’s chairs, car seat installation is straightforward and roomy.

Bench Seat Configuration

With the second-row bench, you get two sets of exposed lower LATCH anchors plus an extra single anchor in the middle spot . This is a nice touch—it gives you more flexibility to install a car seat in the center position using LATCH instead of a seat belt .

The catch: The extra lower anchor eats into space on the outboard seat, so you can’t install a car seat next to it . If you’re planning three across, you’ll need to work around this limitation.

Grading breakdown:

  • Infant Seat: Grade A. Easy install, and a 5’6″ front passenger still had ample legroom .
  • Rear-Facing Convertible: Grade A. Installation was smooth, and fit was excellent .
  • Forward-Facing Convertible: Grade A. Remove the head restraint, and it fits perfectly .
  • Booster: Grade B. The booster fits well, but the buckles sit low in the cushion on short stalks, making them tough for kids to grasp independently .

Captain’s Chairs Configuration

The Autograph trim and some higher trims offer second-row captain’s chairs, which bring total seating capacity down to six . Installation is equally straightforward—easily accessible lower anchors and ample space for rear-facing seats without compromising front passenger legroom .

The trade-off: You lose the ability to put three car seats in the second row. But you gain easier third-row access and a more premium feel.

Three Across in the Second Row

Cars.com tested three car seats in the second row: a booster behind the driver, a forward-facing convertible in the middle, and an infant seat behind the passenger . The forward-facing convertible had to be installed using the seat belt because the extra lower anchor in the middle seat conflicts with outboard seats . Result: It can work, but space is tight, and you need to plan carefully.


Third Row: Tight but Usable (for Kids)

The third row is where the QX60 shows its limitations. Legroom is only 28 inches, which is tight even for kids . The accommodations are mixed.

LATCH Availability

There’s one set of lower LATCH anchors on the driver’s side of the third row, exposed and easy to connect . Two top tether anchors sit on the seatback, clearly marked and easy to use .

Car Seat Grades

  • Forward-Facing Convertible: Grade B. Installation via LATCH was easy, but the fixed head restraint pushes the car seat off the seatback—it should sit flush . Legroom is also very tight unless the second row slides forward .
  • Booster: Grade C. Legroom is an issue, there’s barely enough seat width to accommodate a booster, and kids will likely struggle to find and use the buckle embedded in the bottom cushion .

Third-Row Access: The Standout Feature

The QX60’s One-Touch second-row seats are a legitimate family-friendly innovation. One push of a button tilts and slides the second-row seat forward, creating a large opening to the third row .

Here’s the kicker: it works with a forward-facing car seat installed in the second row . It also works with an infant seat base installed . Rear-facing convertible seats prevent it from moving enough, but for most families, this is a huge win .


Seating Capacity Summary

ConfigurationSeating CapacityCar Seat Capacity
Second-row bench (Luxe, Pure, Sensory trims)7Up to 3 car seats in second row, 1 in third row
Second-row captain’s chairs (Autograph trim)6Up to 2 in captain’s chairs, 1 in third row

The bench seat option gives you the most flexibility for car seat placement, while captain’s chairs offer easier access and more comfort for second-row passengers .


Real-World Considerations

The Booster Buckle Problem

Both Cars.com reviews flag the same issue: the seat belt buckles in the QX60 sit low in the seat cushion on short stalks . For kids in boosters, this makes it tough to buckle independently. If your child is just transitioning to a booster, this is worth testing before you buy.

The Third-Row Head Restraint Issue

The fixed head restraints in the third row push forward-facing convertibles and boosters off the seatback . For boosters, it’s a real safety concern—the seat should sit flush against the seatback. This is the main reason the third-row booster gets a C grade .

Rear-Facing vs. Third-Row Access

Rear-facing car seats in the second row will prevent the One-Touch seat from sliding forward enough for third-row access . Plan accordingly—if you need regular third-row access and have a rear-facing seat, you’ll need to install it on the side you use less often or accept that you’ll need to move seats to get people in and out.


Frequently Asked Questions

How many car seats fit in a 2024-2025 QX60?
Up to 4 car seats total: 3 across the second-row bench (with careful spacing) and 1 in the third row driver’s side. With captain’s chairs, you can fit 2 in the second row and 1 in the third row.

Does the QX60 have LATCH anchors in the third row?
Yes, the third row has one set of lower LATCH anchors on the driver’s side and two top tether anchors .

Can the One-Touch second-row seat work with a car seat installed?
Yes, it works with forward-facing car seats and infant seat bases installed. It does not work with rear-facing convertible seats installed .

Which QX60 trim is best for car seats?
The bench seat configuration (Luxe, Pure, Sensory trims) gives you the most car seat flexibility. The Autograph trim’s captain’s chairs offer easier access but reduce total seating to six .

How tight is the third row for car seats?
It’s tight. A forward-facing convertible earns a Grade B, and a booster gets a Grade C due to legroom, seat width, and buckle accessibility issues .

What’s the best car seat for the QX60 third row?
A narrow forward-facing convertible is your best bet. The fixed head restraints cause fit issues, so test before buying. The driver’s side is the only position with LATCH anchors .


References:

What’s your car seat setup in the QX60—have you found a winning configuration for your family? Drop a comment below and share your experience!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *